TSín Thin Slitting Ábhar líne Monaróir agus Soláthraí | Ritec

ár Faith

Chun a bheith An ceannródaí Of The Chliste Déantúsaíochta tSín!

Thin Slitting Ábhar líne

Cur síos achomair:

Thin Slitting Ábhar líne Tá sé comhdhéanta díobh seo a leanas: carr corna 1. iontráil, 2. uncoiler, 3. slitter, 4. coiler scrap, 5. aonad teannas, 6. recoiler, etc Déanann ár meaisín slitting amach slitting ar fuar nó cruach te rollta carbóin, tinplates, déanta as cruach dhosmálta, agus cineálacha eile de mhiotal a bhfuil dromchlaí brataithe. Tá sé an meaisín slitting úsáideach, a úsáidtear go forleathan le linn phróiseáil fearais tí, automobiles, crua-earraí, táirgí cruach agus níos mó Buntáistí: 1. Ard-chaighdeán ghearradh ...


Sonraigh Táirge

Táirge Clibeanna

Thin Slitting Ábhar líne

Tá sé comhdhéanta díobh seo a leanas:
carr corna 1. iontráil,
2. uncoiler,
3. slitter,
4. coiler scrap,
5. aonad teannas,
6. recoiler, etc
Déanann ár meaisín slitting amach slitting ar cruach carbóin fuar nó te rollta , tinplates, déanta as cruach dhosmálta, agus cineálacha eile de mhiotal a bhfuil dromchlaí brataithe. Tá sé an meaisín slitting úsáideach, a úsáidtear go forleathan le linn phróiseáil fearais tí, automobiles, crua-earraí, táirgí cruach agus níos mó
Advantages:
1. High cutting quality
2. High utilization rate of materials
3. Stepless cutting speed regulation
Uncoiling Unit
1. Several coils can be pre-placed on the loading station to improve working efficiency.
2. This uncoiling unit of our slitting line adopts a hydraulic collapsible drum, which does no harm to the sublayer of the material. It is capable of carrying out tensile uncoiling or manual material unloading, which effectively prevents the material from deflecting and scraping.
3. Both single-head and double-head type uncoiling units are available.
Slitting Unit
1. The slitting head arbors are fixed in eccentric sleeves. The slitting angle remains unchanged if the blade has just been polished.
2. This slitting line has two slitter heads. While one is running on line, kives setting up can be done on the other, which can greatly eliminate production down-time. As a result, this slitting line carries out slitting and blade changing simultaneously. This greatly increases the working efficiency.
3. Hydraulic locknuts could be used for higher blade positioning precision.
Tension Unit
1. Two pre-separation devices are fitted to this tension unit. The disengaging shaft could be transversely removed for faster switching of separating plates.
2. It has a friction type tensile working table. The adjustable tensile could be offered by hydraulic power or pneumatic power.
3. Our slitting line could also be equipped with a roller type tightening machine, which is suitable for materials of coated surfaces because it does not harm the coated surfaces.
Coiler
1. Our slitting line could be fitted with a seamless hydraulic expansion coiler, which does not damage the sub-layer of the material.
2. The material clamping device has stress reducing characteristics. The roundness of the winding drum remains unchanged for plates of different thickness.
3. It carries out firm, dense and neat coiling.
Parameters of Slitting Line

Model / Míreanna

Tiús (mm)

Leithead (mm)

slitting Uimhir

ESL-0.5 × 1000

0.15-0.5

300-1000

12

ESL-0.5 × 1300

0.15-0.5

500-1300

24

ESL-2X650

0.3-2

200-650

10-30

ESL-2X1000

0.3-2

300-1000

10-30

ESL-2 × 1300

0.3-2

500-1300

12-30

ESL-2 × 1600

0.3-2

500-1600

12-30

ESL-3 × 1600

0.3-3

500-1600

30/08

ESL-3 × 1800

0.3-3

900-1800

30/08

ESL-4 × 1600

1-4

900-1600

30/06

Nós imeachta Idirbheart:
Fiosrúcháin - Tionscadal - Cláraigh - Táirgeadh - Iniúchadh - Íocaíocht - Iompar - Installation & Coimisiúnaithe - Guaranty

 


  • Roimhe Seo:
  • Next:

  • 
    WhatsApp Líne Comhrá!