Our Faith

To Be The Pioneer Of The Intelligent Manufacturing China!

Manufactur standard Cnc Flat Steel Marking - Electrical Connecting Parts – Ritec

Short Description:

The power fittings are all kinds of devices connectedand combined in the power system,which are metal accessories that transmit mechanical load,electrical load and some protective functions.        Application      Categories   According to the main performance and use of the fittings, the fittings can be roughly divided into the following categories: 1)Hanging metal fittings, also known as supporting metal fittings or hanging clamps. This type of fitting is ma...


Product Detail

Product Tags

Related Video

Feedback (2)

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for Special Cnc Punching Machine , Steel Structures For Workshop , High Speed Cnc Drilling Machine , We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.
Manufactur standard Cnc Flat Steel Marking - Electrical Connecting Parts – Ritec Detail:

The power fittings are all kinds of devices connectedand combined in the power system,which are metal accessories that transmit mechanical load,electrical load and some protective functions.

 

 

 

 Application

 

Application

 

 Categories

 

According to the main performance and use of the fittings, the fittings can be roughly divided into the following categories:

1)Hanging metal fittings, also known as supporting metal fittings or hanging clamps. This type of fitting is mainly used to suspend the wire insulator string (used for linear towers) and the suspension jumper on the insulator string.

2)Anchoring hardware, also known as fastening fittings or wire clamps. The fitting is mainly used for fastening the terminal of the wire to be fixed on the wire-resistant insulator string, and is also used for fixing the lightning-proof terminal and anchoring the cable. The anchoring hardware bears all the tension of the wire and the lightning protection wire, and some anchoring hardware becomes the electrical conductor.

3)Connecting the fittings, also known as hanging wire parts. This fitting is used to connect insulators into strings and to connect the fittings to the fittings. It is subjected to mechanical loads.

4)Connecting the fittings. This kind of fitting is designed to connect various bare wires and lightning protection lines. Continue to bear the same electrical load as the wire, most of the connecting fixtures bear the full tension of the wire or lightning conductor.

5)Protective fittings. This kind of fitting is used to protect wires, insulators, etc., such as a pressure equalizing ring for protecting insulators, a weight for pulling up insulator strings, and an anti-vibration hammer and guard wire for preventing wire vibration.

6)Contact with the fittings. The fitting is used for connecting the hard busbar, the soft busbar to the outlet terminal of the electrical equipment, the T connection of the conductor and the parallel connection of the unsupported force, and these connections are electrical contacts. Therefore, high electrical conductivity and contact stability of the contact fitting are required.

7)Fixed metal fittings, also known as power plant fittings or high current busbar fittings. The metal fittings are used for fixing and connecting various hard busbars or soft busbars and post insulators in the power distribution device, and most of the fixed gold fittings are not used as electric conductors, and only serve to fix, support and suspend. However, since these fittings are used for large currents, all components should have no hysteresis loss.

Remark

Most of the metal fittings need to withstand large pulling forces during operation, and some also need to ensure good electrical contact. It is related to the safety of the wires or towers. Even if one is damaged, it may cause line faults. Therefore, the quality, proper use and installation of the fittings have a certain impact on the safe transmission of the line. Therefore, the company will scientifically design the fitting structure according to the customer’s specific use environment (such as tower distance, sag requirement and allowable tension of the drape point, communication capacity, short-circuit current, etc.), and the structure can also be specified by the user.  

 

 

 

 


Product detail pictures:

Manufactur standard Cnc Flat Steel Marking -
 Electrical Connecting Parts  – Ritec detail pictures

Manufactur standard Cnc Flat Steel Marking -
 Electrical Connecting Parts  – Ritec detail pictures

Manufactur standard Cnc Flat Steel Marking -
 Electrical Connecting Parts  – Ritec detail pictures

Manufactur standard Cnc Flat Steel Marking -
 Electrical Connecting Parts  – Ritec detail pictures


Related Product Guide:
Seed Drill Machines Market Emerging Trends and Company Profiles to Watch- Mahindra & Mahindra, Kubota, AGCO, CLAAS KGaA mbH in 2018-2026 – Press Release | Crossarm Making Machine
Camp Fire Victim: PG&E Told Her it Needed to Fix Sparking Transmission Line Day Before Deadly Blaze GT Logo | Transmission Line Towers

continue to improve, to ensure product quality in line with market and customer standard requirements. Our company has a quality assurance system have been established for Manufactur standard Cnc Flat Steel Marking - Electrical Connecting Parts – Ritec, The product will supply to all over the world, such as: Thailand , Spain , Greenland , We have constructed strong and long co-operation relationship with an enormous quantity of companies within this business in Kenya and overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Kenya for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
  • We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
    5 Stars By Frank from Ottawa - 2016.03.08 14:45
    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Nydia from Seychelles - 2015.11.02 11:11
    
    WhatsApp Online Chat !