EMCL Moveable Shear Cut-to-Length Line
Application:
Our products are widely used in transfomer, motor, household appliance, automobiles, hardware, steel industries, etc. It can be used for processing cold and hot rolled steell, carbon steel, galvanized steel, silicon steel, tinplate, stainless steel, pre-painted steel, aluminium, copper and other metals.
Advantages:
Self-developed moving shear control system, with reliable performance, and shearing speed of 60m/min.
● High shearing speed, high production efficiency
● Continuous feeding of leveling machine, follow-up shearing of shearing machine, high quality of sheet surface.
● Full linear speed can be adjusted at will, without any impact on blanking precision.
Specifications
Parameters/Model |
Processing Thickness |
Processing Width |
Cutting Accuracy |
Max. Speed |
Uncoiling Weight |
EMCL-3×2000 |
03-3 |
500-2000 |
±0.5 |
60 |
15 |
EMCL-6×2000 |
1-6 |
1000-2000 |
±0.5 |
50 |
20 |
EMCL-8×2000 |
2-8 |
1000-2000 |
±1 |
40 |
20 |
EMCL-12×2000 |
3-12 |
1000-2000 |
±1 |
30 |
30 |
EMCL-16×2000 |
4-16 |
1000-2000 |
±2 |
30 |
30 |
EMCL series cut to length line is composed of the followings:
1 |
Entry coil car |
1 set |
2 |
Uncoiler |
1 set |
3 |
Outboard support |
1 set |
4 |
Feeding table |
1 set |
5 |
Leveler |
1 set |
6 |
Loop table |
1 set |
7 |
Side guide |
2 pairs |
8 |
Servo feed roll |
1 PC |
9 |
Shear |
1 PC |
10 |
Conveyor belt |
1 set |
11 |
Stacker |
1 set |
12 |
Blower |
1 set |
13 |
Hydraulics |
1 set |
14 |
Electrics |
1 set |
Transaction procedure:
Inquiry – Project – Sign – Production – Inspection – Payment – Transportation – Installation& Commissioning – Guaranty